Recent content by Larry0071

I've pressure washed mine a number of times, but I use a soft wand adjusted to fill fan width so it's not really a strong stream. I'll adjust it narrow and harder hitting for frame, wheels, tires and loader. But engine and things with wires I tend to hold back and use the wide fan spray. No...

If your on steep hill ground like I am, the 72" Land Pride is asking more than the B2650 wants to give. I drove it over to my sister in laws house with a relatively flat spare lot (compared to my yard) and had no trouble with it in high grass and mid range. The problem comes into play when you...

79 F250 Camper Special 521 BBF was 1170 HP with a cast intake, single Dominator and on VP C16 gasoline. It's a Ford Motorsport SVO block, iron EX-514 heads and intake, 0.920" lift Crower solid roller. The engine was around $35,000. That's why we got out of the game. We lost 2 engines in 2...

It will lift a 1979 Ford F250 sled pulling truck off of the ground and move it as desired. I was able to chain on to the front or rear and rotate the bucket down, lift the arms up until the chain was tight and then curl the bucket up and pulled the truck off of the ground and then start moving...

Very nice! Man, that cab would be sweet, there was just no way I could afford $37,000. Your a lucky guy! Did you have a stereo put in it as well? That is dang sweet! Sent from my XT1650 using Tapatalk

Another monster truck version of the B2650! I love mine [emoji6] Sent from my XT1650 using Tapatalk

I really wish that the B2650 had that dual seat arrangement. That would solve all of my issues and complaints with my new tractor. Sent from my XT1650 using Tapatalk

I've had my new B2650 TLB for 8 days and 8 hours now and I wanted to put up a first impression video since there is such limited video information out there on this model. If you have interest, go ahead and check it out. https://youtu.be/iP723RGb6XE Sent from my XT1650 using Tapatalk

How did you modify the springs, I bought the ones you posted the photo of, but they hit the bracket in front of the bolt holes. So my first idea was to add spacers under the springs to lift above that, but it's far to tall and the seat is trying to dump me off the front. I'm not able to see in...

I'm a pretty vocal supporter of the Yamaha SxS build quality. At 11 years old my Rhino 660 has been a tank. In 2011 I hailed it from Pa to Colorado and used it in unimproved roads up in the mountains, picture attached is at the top of American Flag Mountain 12,713' elevation. It's been my...

I had a BX25 and was able to leave the 3 point lower arms and sway bars on and just fold them straight up and then put the backhoe on. Can this be done on the B2650, or do I have to completely remove the 3 point lower arms to put the backhoe on again? I liked how on the BX25, folding the arms...

No, I paid the $450 cost to upgrade from the standard rims and tires to the B3350 optional ones. They did give me the factory seat suspension, I really despise that you buy the premium B--50 series but they remove the suspension seat if you get the BH77 backhoe. Now I sit on the rubber hard...

I love my B2650, I also considered the L2501 but the physical size and weight steps up at the L and I wanted compact, yet larger than my BX that I sold. The B2650 is already fairly large compared to the BX, but the loader and Backhoe are over 2x the capability. I also went with the larger tires...

Yes there is, stick your head underneath your tractor in the center and look back a following the drive shaft. You'll see a white plastic fan that is only minimally protected from a stick or something coming exactly straight up vertically from the bottom. Anything coming from a forward Direction...

I agree with what your hearing. I have an 11 year old UTV and my tractor and for the most part they in 4x4 all of the time unless I come up onto the blacktop driveway. I stop where my lower level driveway (limestone) meets the upper level (blacktop) and change to 2WD. But living life in 4wd in...