Latest activity
-
JResolved, it was an actual email from Messicks, sent accidently. Thanks, all.
-
OntheRidge replied to the thread Statement from Messicks.Resolved, it was an actual email from Messicks, sent accidently. Thanks, all. -
hodge replied to the thread B2401DT and a Woods RM59 mower.I ran an RM59 with my B7100, and it handled it great. I cut a lot of grass with that combo. The B7100 is 14 PTO hp, and I never ran out... -
Ggbaker53 replied to the thread B2401DT and a Woods RM59 mower.I appreciate your input and I think it’s should also be noted that the B2401DT PTO hp is 19.2 and the information on the RM59 says it...
-
The dutch guy replied to the thread What did you do to or on your Kubota today?.The ROPS i‘s factory and has indeed heavy wall material. It used to have a canopy. But since the dutch climate is not that hot, i had in... -
Magicman replied to the thread Daily Chuckle. -
-
Jjaxs replied to the thread Kubota B1550 power steering problem.Power steering issue is a good excuse to buy a shop manual. Likly only needs valve adjustment and you'll find step by step instructions...
-
North Idaho Wolfman replied to the thread Kubota L35 putting back together..I've repaired worse. Heat, straighten and weld. -
North Idaho Wolfman replied to the thread Bucket leveler. What broke?.Dealer only part, and it's not that expensive. Around $95
-
HHugo Habicht reacted to City boy's post in the thread Correct Hydrasulic pressure for BX 2360? How much is too much? with
Like.
Thank you for the input. It was in fact a broken plug in the dead man circuit that just decided to separate while I had the tractor... -
RRonnie young posted the thread Kubota B1550 power steering problem in Service, Repair & Maintenance.Hey Guys I have another head scratcher...Kubota B1550 Hydro trans .. The power steering is acting up. It is hard to turn, yet sometimes...
-
SYour on the light side of having the recommended HP to run it. You have 20.5 PTO HP.
-
HProbably need a fitting for a Japanese car sensor. I think the tractor will have some BSPP or BSPT tapped hole. I also recall seeing a...
-
HHugo Habicht reacted to North Idaho Wolfman's post in the thread Temperature gauge 1984 L245 with Like.
You need a BSPP ( British Standard Pipe Parallel ) adapter.
