What did you do to or on your Kubota today?

S-G-R

Well-known member
Lifetime Member

Equipment
LX3310, LA535, rear remotes, third function, R14's
Jun 17, 2020
887
1,575
93
PEI Canada
I noticed today that mine has taken a hit as well but is only bent in about an inch near the bottom. While I think it was worth it I also know that I am less concerned of real damage so I’m less careful. Too late now.
Mine is pushed against the grill so I'm going to take it off tonight or tomorrow and pound it back to somewhat original condition😄
 
  • Like
Reactions: 2 users

Jsjac

Active member

Equipment
B2650
Feb 13, 2022
163
226
43
New Hampshire
I removed the snow blower and put the rototiller on.
Moved lots of rocks piled up from the garden in the past.
The rototilled the garden.
Picked up 4 yards of composted cow manure. Tilled that in today
IMG_20220508_155134576.jpg
 
  • Like
Reactions: 2 users

Daren Todd

Well-known member
Lifetime Member

Equipment
Massey Ferguson 1825E, Kubota Z121S, Box blade, Rotary Cutter
May 18, 2014
8,964
4,350
113
Vilonia, Arkansas
6 months since we moved. Zero turn has been stored at my sons house. Over for a mother's day crab boil. Grandson kept pointing at it. So.... we sat on it for a bit and just chilled out. 😂🤣😂🤣


20220508_175844.jpg



IMG_20220508_175915.jpg
 
  • Like
Reactions: 5 users

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25TLB
Feb 9, 2021
4,069
4,625
113
NW Montana
Typical day. Moved some rocks so that I could complete the cutting of the bank that I started a couple of weeks ago. Then I ran the flail along the fence line shown which is the first time I've cut this boundary in the 8 years of owning this place. You can see snow falling to the North.

I'm really, really, really liking this flail. There's a learning curve for sure but I'm starting to get the hang of it and making fewer mistakes such as making a turn with the flail on the deck ... not good.

grapple_flail.jpg


flail_fence_1.jpg


flail_fence_2.jpg


The view from the cab.

flail_fence_3.jpg
 
Last edited:
  • Like
  • Love
Reactions: 11 users

radas

Well-known member

Equipment
2022 LX2610HST, 3rd Function, Rear Remotes, BH77
Mar 21, 2022
721
831
93
Michigan
Typical day. Moved some rocks so that I could complete the cutting of the bank that I started a couple of weeks ago. Then I ran the flail along the fence line shown which is the first time I've cut this boundary in the 8 years of owning this place. You can see snow falling to the North.

I'm really, really, really liking this flail. There's a learning curve for sure but I'm starting to get the hang of it and making fewer mistakes such as making a turn with the flail on the deck ... not good.

View attachment 79653

View attachment 79654

View attachment 79655

The view from the cab.

View attachment 79668
That's not bad for 8 years of growth - beautiful property you have there.
 
  • Like
Reactions: 1 user

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25TLB
Feb 9, 2021
4,069
4,625
113
NW Montana
That's not bad for 8 years of growth - beautiful property you have there.
Thanks ... and I never take it for granted.

I get elk on the property so maybe they eat it down a bit. But probably due to the lack of rain up here. We have lakes and rivers all over the place but they're filled by snow melt rather than rain.
 

johnjk

Well-known member
Lifetime Member

Equipment
B3200 w/loader, Woods RC5 brush hog, 4' box blade, tooth bar, B1700 MMM,
Apr 13, 2017
1,252
819
113
West Mansfield, OH
We got over an inch or rain Friday evening so it will be a few days till it dries out enough to get either of the orange out to play. I did pull the Quad out and spray for ticks on Saturday. Gave it a good washing when I was done. Noticed the rear end link bushings were shot so I ordered up a set. More fun ahead!
 

Attachments

RMS

Well-known member

Equipment
LX2610HSDC, RCR1260, PFL1242, LX2963, RB1684, WC-68 Chipper,Flail Mower
Sep 26, 2021
178
266
63
Buckfield Maine
Installed 2.5" bora spacers on my lx2610.
 
  • Like
Reactions: 2 users

SteveBX23

Well-known member

Equipment
LX2610SU; BH77
May 23, 2021
174
295
63
South Jersey
6CAE3A7B-36F8-42CC-B0BD-F9D6E3FF9B20.jpeg

0EEB8C51-008D-46FE-A42E-DD95FCC7D36D.jpeg

Caught a nice deal on this RCR1248. Used the backhoe to get it off the trailer, so that’s what I did with my kubota today. Looking forward to using it.

Thanks B737 for the local encouragement, ha 😁
 
  • Like
Reactions: 5 users

radas

Well-known member

Equipment
2022 LX2610HST, 3rd Function, Rear Remotes, BH77
Mar 21, 2022
721
831
93
Michigan
Just ordered an exhaust extension from Kathy at Specialty Repairs for my LX2610.
 
  • Like
Reactions: 1 user

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25TLB
Feb 9, 2021
4,069
4,625
113
NW Montana
Had a tree in the grapple, was hanging all over the place, rear tire ran over the top and smacked the hood before I could stop it.
These tractors are tools and tools get damaged and worn, but still ... sorry to hear about that. :(
 
  • Like
Reactions: 1 user

ctfjr

Well-known member
Lifetime Member

Equipment
L3800HST
Dec 7, 2009
1,686
1,882
113
central ct
Used my favorite implement, the stump bucket, to plant 4 azalias in the backyard bordering the woods. Fortunately this area is fenced in for the dogs but the deer stay away too.
I just can't imagine me digging this by hand with all the potatoes I had to pull out. Even the phd would have been a problem.

4 azalias in backyard 20220509_113659_resized.jpg
 
Last edited:
  • Like
Reactions: 3 users