What did you do to or on your Kubota today?

Gundoctor

New member
Lifetime Member

Equipment
Kubota M7040 4x4/ BX2230 4x4/ JD MX 8/ Ford 101 Moldboard 3 bottom Plows -
I had a tree blow over so I put my chain saw in back of JD Gator . I got the job done and went to start Gator & nothing. I had to walk back & get my BX2230 to pull it back. The Gator battery had a dead cell.
 

Myb3350

Member

Equipment
B3350 JD430 Moline BG and BF
Jul 4, 2016
89
0
6
meridian ms
Spent 7 hours Bush hogging on my B3350 worked great very strong tractor for a compact tractor , 5 ft high bushes that had not been hogs in years
 

Mike9

Active member

Equipment
Kubota B6200
Oct 9, 2015
391
31
28
Ghent, NY
I got the new tires squared away, painted rims, fenders, foot plates and control plates as well as rops, three point, axles, hubs front and rear and hydro tunnel cover and frame. Derusted everything I could and painted those - mounts, washers, bolts - everything and reassembled today - I am tired. I also moved the hubs out an extra inch on the rears and it makes a big difference in feel. I'm lovin' it - can't wait to fill the rears next. :D



 
Last edited:

Lil Foot

Well-known member
Lifetime Member

Equipment
1979 B7100DT Gear, Nissan Hanix N150-2 Excavator
May 19, 2011
7,486
2,494
113
Peoria, AZ
That is a great looking unit! Love those big meats!
 

Teg1928

New member

Equipment
Grand L4200 4x4 GTSC, FEL, Tiller, PH Driller, finish mower, Bush hog, + more
Sep 15, 2016
15
0
0
Martinsville, Indiana
What lilfoot says. That machine looks mean.
Was last night I found a free 10 x 12 mini barn on Craigslist and loaded it on my trailer with my L4200. I love that tractor. the older I get the greater my appreciation for Hydraulics! :D
 

MattN03

Active member

Equipment
2011 B3200, LA504 FEL w/B2366 SSQA conversion, BH76 BH, EA Wicked 55
Sep 5, 2016
222
40
28
KY
I picked up this 2011 B3200 with a LA504 FEL and BH76 BH last week. It was a one owner with 78 hours on it. It was parked under a carport it's whole life and was really clean. I brought it home, washed, and waxed it, and have started using it around my property. It's going to be handy having this tractor around! :D
 

Attachments

Last edited:

Myb3350

Member

Equipment
B3350 JD430 Moline BG and BF
Jul 4, 2016
89
0
6
meridian ms
Bush hogged about 3 hours today on my B3350 very rough hogging, field had not been bush hogged in about 5 years, not sure a B2650 would have handle the job , notice the regen light was on, I just kept hogging i did nothing after about 20 min the light went out on its owns, was a good successful regen picture perfect love my B3350 SO FAR keeping my finger Cross
 

Buck3343

New member
Sep 16, 2016
24
1
0
US
Today I helped my best friend dig a trench for his gray water
http://uploads.tapatalk-cdn.com/20160920/e16bd5b75f3e0f9d2e16f07d8921566f.jpg[/IMG


Jobs well done. Thanks Beulah!!!!!

Sent from my SAMSUNG-SM-G891A using Tapatalk
 

Tooljunkie

Well-known member
Lifetime Member

Equipment
L1501,home built carry all, mini plow blade.
May 13, 2014
4,150
33
48
60
Lac Du Bonnet, Manitoba,Canada
Buck, i did a similar thing a few years back with weeping tile also, except the cloth covered stuff. What used to freeze up every spring hasnt since. Worked very well for me, but didnt have the kubota at the time. Made a trench cutter fir it now.
 

Buck3343

New member
Sep 16, 2016
24
1
0
US
Well put old "BEULAH " to work again today. We didn't do much, but it was fun taking an old dirt mound down behind the shop!!!! Will finish this later.


Sent from my SAMSUNG-SM-G891A using Tapatalk
 

RustyW

New member

Equipment
L3430GST
Sep 20, 2016
12
0
0
Muldrow Oklahoma
I've been clearing some property so I can build a fence. Made a tray for my saw & to hold some short log chains. I ran out of metal so I just used a milk crate for the time being. I've been reading about & watching youtube on the piranha toothbar. I have a lot of clearing to do but poor boys got poor ways so for now a chainsaw & FEL is gonna have to do.










 

MattN03

Active member

Equipment
2011 B3200, LA504 FEL w/B2366 SSQA conversion, BH76 BH, EA Wicked 55
Sep 5, 2016
222
40
28
KY
I cleared 400'+ by hand last spring & fall so at least you have a tractor lol. I used my Kawasaki Teryx 4, Stihl chainsaw, and Stihl 130r Kombi brush saw & pole saw combo to clear all of the embankment. I hired a guy with a skid steer & mulching head to do the rest of the property. I picked up a used B3200 a couple weeks ago and look forward to putting it to use to further clear the land and prep the site to build our house on.
 

Attachments

Jeff Gordon

New member

Equipment
B7100hst,loaderb1630-c
Jul 18, 2015
97
0
0
Oxford,Michigan
Moved 10 good sized boulders with the fel ,a job I have been putting off ,the old girl did a great job,I have been mowing around these things for 20 years finally got tired of it.But did notice I have hydraulic leak on one of the fel cyclinders.
 

Buck3343

New member
Sep 16, 2016
24
1
0
US
Well "BEULAH" has put in some good work the past few days. She has dug, pulled, and pushed.


Sent from my SAMSUNG-SM-G891A using Tapatalk
 

Tooljunkie

Well-known member
Lifetime Member

Equipment
L1501,home built carry all, mini plow blade.
May 13, 2014
4,150
33
48
60
Lac Du Bonnet, Manitoba,Canada
Pallets!
Putting all my loose stuff(steel and parts and pieces)
Onto pallets so they are easier to move. Can have a shed empty in a matter of minutes, not hours. My home made three point forks are awesome.
 

Creature Meadow

Well-known member
Lifetime Member

Equipment
2012 L4600, Disk, Brush Hog, GB60 Garden Bedder, GSS72 Grading Scraper
Sep 19, 2016
1,063
135
63
53
Central North Carolina
I painted the hooks I had made that will soon be mounted on the FEL.
Hooked up the subsoiler and subsoiled the garden.

My nearly 2 year old daughter loves to ride so we cruised around the farm about an hour.

Working on mounting a tool box to replace the tiny one that came with it. Cleaned out the threads that had some paint in them so my bolts will go in easily.

Put her back in the barn and told her good night.

Have an old disk that has a fast hitch on it that we used with our old farmall. Converting it to a 3 point, lot of WD40 and big wrenches but finally fast hitch removed and 3 point nearly installed. Try and finish it tomorrow after church.

Did get in a morning of deer hunting as well.
 

Creature Meadow

Well-known member
Lifetime Member

Equipment
2012 L4600, Disk, Brush Hog, GB60 Garden Bedder, GSS72 Grading Scraper
Sep 19, 2016
1,063
135
63
53
Central North Carolina
I finished the conversion today on my 5' disk from the fast hitch hook up to a 3 point and tried it out in the garden, it worked great. Little to wet here in NC for disking but I had to try her out.

Anyone local to Raleigh, NC that needs a fast hitch hook up for one of your implements that is good shape let me know and we can work something out as I know longer will need it.

Jay