Profnohair
Member
Lifetime Member
Equipment
L1500, 42" bh, box blade, G6200HST, Mahindra 450 with BH, FEL, etc.
We've been splitting fire wood the wrong way for years
- Thread starter Profnohair
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
I split 6 cords of wood for years doing it the manual method, swinging a maul for a few months is tiring. I don't care how you design the maul/axe head it's still a ton of work!
That design also looks like it's going to be brutal on twisting your wrist!
Thanks, but I'll stick to doing it with my hydraulic splitter!
That design also looks like it's going to be brutal on twisting your wrist!
Thanks, but I'll stick to doing it with my hydraulic splitter!
I have a # of axes, splitting mauls, wedges etc that I use when I need to work out some pent up issues.
I have hydro's for working on my wood supply.
That being said, I have a friend that hand splits 150+ cords, (4'x4'x8'), a year because he likes to do it. Keeps 4 - 5 for him self and sells the rest.
. I have hydro's for working on my wood supply.
That being said, I have a friend that hand splits 150+ cords, (4'x4'x8'), a year because he likes to do it. Keeps 4 - 5 for him self and sells the rest.
Donystoy
Active member
Equipment
LX2610HSDCC, B/H, Loader, plus numerous other attachments. B7200 sold
I'm with you on that one Wolfman! I also used to split about the same all by hand until I had a maple tree cut down that was about 100 feet tall and over 30" across at shoulder height. My 40' ladder just barely reached the first crotch so I hired professionals' to bring it down in pieces since it was close to a house. Even after I cut it up and left it for some time the axe would just bounce off of it. I even tried to sledge hammer a wedge into it with the same results. I built my super duty splitter with that tree in mind and my shoulder has been thanking it ever since.I split 6 cords of wood for years doing it the manual method, swinging a maul for a few months is tiring. I don't care how you design the maul/axe head it's still a ton of work!
That design also looks like it's going to be brutal on twisting your wrist!
Thanks, but I'll stick to doing it with my hydraulic splitter!
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Lil Foot
Well-known member
Lifetime Member
Equipment
1979 B7100DT Gear, Nissan Hanix N150-2 Excavator
Kubota used to offer that type of splitter as an accessory with the B5100/6100/7100 series- here's a scan from their brochure.
Attachments
Lil Foot
Well-known member
Lifetime Member
Equipment
1979 B7100DT Gear, Nissan Hanix N150-2 Excavator
I have one of these PTO screw splitters and it is an awesome tool. Works great and pretty inexpensive compared to hydraulic or stand alone splitters. Folks say they're dangerous, and I'll agree, but certainly no more dangerous than many of my other tools including chain saws. I like machines, this one is simple and flat out works.
Kubota_Man
Member
Equipment
BX24, Rear blade, Front blade, Snowblower, 54" MMM, Box scraper, Landscape rake
Dan_R_42
Member
Equipment
B7100-D, w/ Sims Cab, B219 FEL, ARPS 70 Backhoe, Oversized R4 Tires, LX2610 Cab
It does look interesting. Thanks, I think I will continue to use the log splitter. Less manual labor.
Lil Foot
Well-known member
Lifetime Member
Equipment
1979 B7100DT Gear, Nissan Hanix N150-2 Excavator
It works real good on the gnarly stuff, but slicker than you-know-what on everything else!
my uncle always used a double bit axe and he swung it so it struck at about a 30deg. angle, weight of the second bit did the exact same thing. it was fast but hell on your wrists.
I've had it over 3 years now and love it! Been splitting 15-20 cords a year, mostly oak, but some red elm, hickory & locus. The only way someone else will get this splitter is I'll have to die!