retiredlawnboy
New member
Equipment
M6800, L245DT, L245H, Gravely 816T with Cab and Wing Mower, 5665, 1960s Li
I have an M6800 (4x2 ROPS with FEL) and is not running at optimum speed.
I have replaced the needed fuel pump, checked the injectors, and am now to the conclusion that the front bank of the injector pump is not operating adequately. There are 6 bolts/nuts on the top to remove the pump from the assembly but it will not come out of the assembly. The dealer mentioned there are a few retainers in there and you must remove the access cover to do that. The problem is I am blind or there is no access cover. I cannot find any adequate procedure for removal, my WSM is too vague. Anybody have any info?
I have replaced the needed fuel pump, checked the injectors, and am now to the conclusion that the front bank of the injector pump is not operating adequately. There are 6 bolts/nuts on the top to remove the pump from the assembly but it will not come out of the assembly. The dealer mentioned there are a few retainers in there and you must remove the access cover to do that. The problem is I am blind or there is no access cover. I cannot find any adequate procedure for removal, my WSM is too vague. Anybody have any info?