TSC Subsoiler Modification
- Thread starter atljetmech
- Start date
The weak link of the TSC subsoiler is the 2 pieces of steel that run from the middle to either side on the back between the 2 3pt links. Those 2 pieces need to be reinforced. That's where they break 
Post 2, pic 1 -- the piece that forms the hypotenuse--broke it more than once
Post 2, pic 1 -- the piece that forms the hypotenuse--broke it more than once
Last edited by a moderator:
Thanks for the info. I'll keep a close eye on it during and after each use.The weak link of the TSC subsoiler is the 2 pieces of steel that run from the middle to either side on the back between the 2 3pt links. Those 2 pieces need to be reinforced. That's where they break
Post 2, pic 1 -- the piece that forms the hypotenuse--broke it more than once
So far so good but I'm not using it a lot or real hard.....yet!
The receiver hitch kinda kills the pipe feed mod... maybe not, gotta think on that one...
Nice work, looks really good.
Nice work, looks really good.
If you're under load and you hear a loud PING, it'll be time to heat, bang, and weld.
Maybe. It might be susceptible to side deflection and bending but it might work with a guide welded on the back of the cutting tang to force it straight.