Trailering accident - Any idea what happened here?

Bcamos

Member

Equipment
L3901
Nov 1, 2016
125
13
18
Texas
This is not my picture.

Just wondering what happened here. Loading gone wrong? You can see a binder or two under the trailer, so it looks like he was in the process of loading the tractor onto the trailer.

1621008291110.png
 

ayak

Well-known member
Lifetime Member

Equipment
L3301 HST
Feb 16, 2018
574
746
93
WV
Definitely looking a little heavy at the tongue. :oops:
if trying to write a caption for this, “he should have gone with the 20’ trailer instead’
 
  • Like
Reactions: 1 users

aaluck

Well-known member

Equipment
L4400HST, Bush Hog 276, RDTH60, Speeco PHD, etc
Oct 9, 2019
928
746
93
Snowdoun, AL
Not sure but tractor looks no worse for the wear. Cant say the same about the truck or trailer.
 
  • Like
Reactions: 1 user

ddavis83864

Active member

Equipment
Kubota Grand L6060
Mar 3, 2021
120
140
43
83801
I'm going to go with the following:

1. Failure to correctly/properly secure the load
2. Failure to set the parking brake/transmission on the tractor
3. (As previously note) Improper tongue weight for trailer/truck
4. Its possible that an adult beverage was involved

Stay safe and Enjoy!
 
  • Like
Reactions: 7 users

Bmyers

Well-known member
Lifetime Member

Equipment
Grand L3560 with LA805 loader, EA 55" Wicked Grapple, SBX72 BB, LP 1272 mower
May 27, 2019
3,170
3,660
113
Southern Illinois
That is what happens when you forget you bought the short bed for your pick up truck and not the long bed.
 
  • Like
Reactions: 1 user

GeoHorn

Well-known member
Lifetime Member

Equipment
M4700DT, LA1002FEL, Ferguson5-8B Compactor-Roller, 10KDumpTrailer, RTV-X900
May 18, 2018
5,713
3,031
113
Texas
Emergency or Hard-Stop with insufficient tie-downs and chocks.
 
  • Like
Reactions: 7 users

Bcamos

Member

Equipment
L3901
Nov 1, 2016
125
13
18
Texas
My guess is a loading accident - not something that happened in transit.
That's my opinion as well. If this happened in transit, the binders wouldn't be on the ground under the trailer.

I'm thinking either the throttle got stuck while loading onto the trailer and the tractor just kept pushing forward, or he was taking it off of the trailer and the rear of the truck lifted up so he shot forward in a panic to level things out again and he went a little too far forward.
 
  • Like
Reactions: 4 users

bcp

Active member

Equipment
BX2360
Apr 20, 2011
645
77
28
SW WA
Last time I used the tractor, I pushed down the forward pedal for a short move, took my foot off, the pedal didn't come up, and the tractor kept moving forward until I got on the brake.

There was a small rock wedged between the pedal arm and the housing. Locked it solid.

Bruce
 

ve9aa

Well-known member

Equipment
TG1860, BX2380 -backblade, bx2830 snowblower, fel, weight box,pallet forks,etc
Apr 11, 2021
1,202
974
113
NB, Canada
It's started with one guy telling another guy "he couldn't pop-a-wheelie with a tractor on a trailer."
The response was "here, hold my beer"
This is the result.
 
  • Like
  • Haha
Reactions: 6 users

spittinfire

New member
May 4, 2021
15
12
3
NC
That's my opinion as well. If this happened in transit, the binders wouldn't be on the ground under the trailer.

I'm thinking either the throttle got stuck while loading onto the trailer and the tractor just kept pushing forward, or he was taking it off of the trailer and the rear of the truck lifted up so he shot forward in a panic to level things out again and he went a little too far forward.
I carry a small, cheap jack stand that I throw under the back of the trailer to avoid that very situation.
 
  • Like
Reactions: 1 user

GeoHorn

Well-known member
Lifetime Member

Equipment
M4700DT, LA1002FEL, Ferguson5-8B Compactor-Roller, 10KDumpTrailer, RTV-X900
May 18, 2018
5,713
3,031
113
Texas
Stupidity.
 
  • Like
Reactions: 4 users

notaz3

Member
Mar 16, 2021
76
67
18
ID
Forgot it was a bumper pull and not gooseneck.
I agree that it was a loading or unloading issue. If transportation, boom should have been down.
 

thirdroc17

Active member
Dec 25, 2013
185
35
28
Michigan
When my mother drove her car through the apartment window she said, "The harder I pushed on the brake, the faster the car went." I'm guessing in both cases it was a case of mistaken pedal identity.
 
  • Like
Reactions: 1 users

BT3101

Member

Equipment
L3130 GST, FEL, Taylor Way BH W/Subframe, Rotary Cutter, Pallet Forks
Mar 20, 2016
20
29
13
Evansville, IN, USA
I am guessing this started with a phrase something like, "dude, hold my beer", and ended with "no way, dude!".
 
  • Haha
Reactions: 1 user

Rdrcr

Well-known member
Lifetime Member

Equipment
L2501 w/ S2T Turbo Kit = 35 PTO HP (Current), B2601 (Sold)
May 7, 2021
628
650
93
WA
Not to worry. Isn't that one of those "military grade tough" Ford Trucks !!!!!!!!!!!
Don’t hate! I have one of those 2022 F-250’s on order, lol
Mike
 
  • Like
Reactions: 1 users