My 2008 MX5000SU will crank but not start unless I remove the fuel shutoff solenoid. If the solenoid is in place the it will only crank and blow a 10A fuse every time. I've tested the 2 pin solenoid by connecting it directly to the battery and nothing happens - the thin plunger doesn't move. I've also tested the wiring harness plug that goes to the solenoid and don't get a reading there either. Anyone have any ideas as to what could be wrong ? I ordered a new solenoid for it but am concerned about ruining it if the problem lies elsewhere. Thanks in advance for any and all suggestions !!!