Stabilizer Parts Old vs New Compatibility.

[Phil]

I want to use the 3 point hitch on my Kubota L3130, this spring, but after removing the backhoe, I noticed that the stabilizers on two the lower links, were not complete. Part 20 is missing to complete the assemblys. (see parts pic)

My question is, since there have been two update to part 20 of this assembly, will new part 20 fit into old part 30 or do I have to purchase the complete stabilizer assembly, Part 10.

Part numbers from Kubota Parts Manual.
Comp Stabilizer Front, Part 20, TD050-39610 replaced by TD050-39612.
Comp Stabilizer Rear, Part 30, TA140-39632.
Ass Stabilizer, Part 10, TD050-39602.

 

[dusty-t]

Since there have only been updates on the on piece I imagine the new part will fit. Just ask your dealer when you order it. I made a set for my B7200 almost exactly like those pictured. They really work nice. Dusty

 

[Phil]

Thanks Dusty-t.
I was thinking the same thing, but was unsure I was reading and interpreting the parts manual properly. As a new tractor owner, I'm slowly coming up to speed on what I need to know about servicing and maintaining this machine.
I'm going to order the items need on Tuesday.
Thanks again.

 

[Phil]

Check with the local dealer before I ordered, he said there should be no problem with the new parts fitting the old. New parts arrived and fit just fine.

 

[Mr. K]

Thanks for the follow-up Phil - everyone likes to hear how it turned out if they are considering the same for themselves.