I have a pin on bucket on my LA 463 loader (L2800 tractor). I am trying to go to SSQA implements. I have been calling dealers trying to find the L2230A adapter but am being told that it can be ordered but may be months or longer to get one. Anyone else having better luck or is there a different adapter that would work on my loader? Any help is appreciated!!!
SSQA adaptor for LA 463 loader
- Thread starter STEVESC
- Start date
ATI makes adapters. They're not cheap, but they are well made. There's one on eBay for $1100 delivery included. Or, if you're handy you can get a DIY kit and save a little.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
QA-KU11 | Tach-All Quick Attach
Order ATI Tach-All, the original conversion system for tractor front-end loaders. This model of Tach-All is designed to fit Kubota LA463 & LA513 model loaders.
forddistributing.com
most 'ready to go' conversion units are $1500+-
Saw these...
palletforks.com
just the 'ends', but at $350 saves a lot of coins. yes, you'll need some steel to make the loader pin attachments and horizontal stiffeners but could easily save $1,000 if you can weld or know a welder.
Saw these...
Skid Steer Conversion Adapter - 17" x 9.25" Latch Box Weld - Quick Tach Mounting System - 50 Grade Steel | Titan Attachments
Transform your pin-on style loader into a universal skid steer or tractor-style quick tach settings with the Skid Steer Quick Tach Conversion Adapter.
palletforks.com
I had the la463 on a L3700 and the current one for a 524,525 L3200,3800, and the new 02 series are the same except the torque tube on the new ones is a smaller diameter. You will find most dealers will only look at the book and not do any research hope this helps