(SOLD) Kubota BX2750D front blower and B2733 quick hitch/subframe kit

[Frankbee3]

Hello, I mistakenly bought this kit for a BX23MLB tractor and discovered that I cannot use the quick hitch and subframe. The quick hitch/subframe is the B2733 which is for the following B Series Kubota tractors;

B2410 HSD/HSDB/HSE
B7400HSD
B7410D
B7500D/HSD
B7510D/HSD/HSDTR
7610HSD

I changed the gearbox oil, greased the fittings and splines and lubricated the drive chain gear reduction. Located in Sanbornton, NH, USA.

Asking $2200 OBO

PM if you have questions.

 

[DustyRusty]

You can use the blower if you purchase the correct hitch for your tractor, however, in this instance, the hitch will be the one that was available prior to the K connect design. You will need to find a driveshaft along with the hitch, but it is doable. If you want to go this route, let me know and I will try to figure out all the small details. It would be best if you could sell this and buy the correct one for your tractor, however, I am used to making lemonade out of lemons when life hands you one.

 

[Frankbee3]

You can use the blower if you purchase the correct hitch for your tractor, however, in this instance, the hitch will be the one that was available prior to the K connect design. You will need to find a driveshaft along with the hitch, but it is doable. If you want to go this route, let me know and I will try to figure out all the small details. It would be best if you could sell this and buy the correct one for your tractor, however, I am used to making lemonade out of lemons when life hands you one.

Hi Dusty, I did end up buying another entire kit for the BX tractor. I bought the correct mount and blower which is installed and tested on my tractor.

Thank you for the offer! I didn't discover Orange Tractor Talks before buying this kit I have for sale. It took me a long time to poke around and find out the information I needed. I am discovering that I will likely need an arc welder in my future...

I wasn't able to find the part number on the mount that works on my BX23 though. I may dismount it to have another look for the part number so I can contribute what works on my tractor.

Thanks again for the offer of help!

 

[DustyRusty]

Is your tractor a BX23 or a BX23S? The BX23 is a model that was introduced in 2004 or 2005, and the BX23S was introduced in I believe 2017. A world apart between those two models. After the BX23 came the BX24 then the BX25, and then the BX23S. In 2023, they came out with an "upgraded" BX23S and I believe it is designated a BX23S-1

 

[Frankbee3]

Is your tractor a BX23 or a BX23S? The BX23 is a model that was introduced in 2004 or 2005, and the BX23S was introduced in I believe 2017. A world apart between those two models. After the BX23 came the BX24 then the BX25, and then the BX23S. In 2023, they came out with an "upgraded" BX23S and I believe it is designated a BX23S-1

Well, the label on the frame of my tractor says BX23MLB. I haven't been able to find much on the "MLB" designation. Serial # 70225. I am guessing this was made around 2004? Does the MLB stand for Mower, Loader and Backhoe?

 

[DustyRusty]

Well, the label on the frame of my tractor says BX23MLB. I haven't been able to find much on the "MLB" designation. Serial # 70225. I am guessing this was made around 2004? Does the MLB stand for Mower, Loader and Backhoe?

I can only guess that the "M" is for mower, or miserable if the tractor fails to start. LOL>

 

[Frankbee3]

I did just sell this snowblower kit. Sorry it took a week to mark as sold..

Frankbee3