seat sensor connector - L3200HST

[wab]

I have a L3200HST that will not start,

I wanted to test the sensor under the seat, but cannot understand how to open the connector holding the sensor, any suggestion ?
I can pry at it with a flat screw driver blade, but it seems to be latched ...

 

[shiraz627]

Post some pictures if possible. Most connectors are either Molex or Amp.

 

[wab]

I am trying to separate this connector (seat safety sensor), but do not understand how to open its latch/catch ...

first shows some marks from my prying with a flat screwdriver

Thanks for the feedback

 

[shiraz627]

See that tab on the right in the last picture. I'm guessing you press that one and the one on the other side together. Some connectors are hard to separate.

 

[D2Cat]

On the picture on the right, you might push a small flat blade screwdriver in that lower slot to release it.