safety switches

[MiltyOO]

I have a ZD28F. I have to jump start it to run. I checked with an amp meter and there is no 12v coming to the solenoid when the starter is activated. It also will shut down when I start moving different distances,, like another switch is disconnecting.
Any help?
Milty

 

[North Idaho Wolfman]

Looks like there is 5 switches and a controller that controls the start and run functions.

You will either need to hunt for them or get the Service manual to tell you where they are at and how they all work.

They might not work off of a strait 12Volts if they are controlling a computer, so I would be very careful testing them with any thing but a good meter.