Just bought a 2016 M7060 had a third remote added with a float option but can't get it to float??? Tried hooking right side, left side, 3 point down, up, middle, the lever will not lock into a float position. Any help?? Thanks. Too, I bought a radio online to install, one for this tractor, will i have to remove the roof to install? thanks.
remote hydraulics
- Thread starter Megacab11
- Start date
Open or closed station? Which whole goods number did you get for the float valve and lever kit?
Pat
Pat
It's a closed cab. Not sure dealer installed. I ask him he, tried everything he suggested???? Send like he said 7611??
Ok dealer install, they need to make it right! M7611 would be right for a float detent valve for a cab and M7688 for the lever kit. Sounds right on for the numbers so I would have to go with the cable not adjusted properly to lock into detent or the right number wrong part in the box.
Pat
Pat
Thanks he will i know, just not open till Monday and was hoping to figure it out. Do you know about the radio? Will i have to remove the roof? Thanks again
Got radio today and took longer to program than install. Would highly recommend 41239dorinda on ebay if you are looking for a radio for a tractor. Plug/play is a understatement.
I had 3 rear remotes installed on my L. One of which being a float valve. When it was first delivered back, the float valve didn't float.
Turns out it was installed incorrectly and wouldn't go into float because of some interference with a hydro line or something.
Dealer sorted it out and it floats just like it should now.
I know L != M, but it might be the same issue?
Turns out it was installed incorrectly and wouldn't go into float because of some interference with a hydro line or something.
Dealer sorted it out and it floats just like it should now.
I know L != M, but it might be the same issue?
Yes two different birds! L series mount vertically on the lift cover between fender & chassis.
M series are on the very back of the lift cover area stacked horizontally.
Pat
I took my head liner down as much as I could and removed my radio. It was a real PIA but it worked. May have been easier to take the roof off but I didn't feel like I could do it by myself. If you have a aftermarket radio it will go in much easier, just mount the sleeve and slide the radio in.