Pto problem ZD326

[Dellnd]

The blades will shut off unless I hold the pto lever all the way forward. Letting it settle back just a 1/2 inch causes the blades to quit working. The linkage under the seat does not appear to be worn or loose. Plenty of oil and new filters. Less than 100 hours on mower.

 

[thomasnchy]

Seems to me like your lever has come loose. Check all linkages and tighten. If the machine is not shutting down then all safety switches are satisfied, so there is no reason to expect a switch issue. The PTO lever is all mechanical.
Pay special attention to items #60, 120, and 110. Check for loose/broken or bent parts.

 

[Dellnd]

Seems to me like your lever has come loose. Check all linkages and tighten. If the machine is not shutting down then all safety switches are satisfied, so there is no reason to expect a switch issue. The PTO lever is all mechanical.
Pay special attention to items #60, 120, and 110. Check for loose/broken or bent parts.

Thank you. I will inspect them closely.

 

[lugbolt]

I'm not going to retype it again.

Kubota ZD326 mower keeps disengaging

Hi all. No guy here. Hope I can get a little input on the issue I’m having. My ZD326 zero turn mover keeps disengaging the mower deck while cutting. I don’t see any sort of adjustments features. Hope someone can give me a little guidance to fix. thanks

www.orangetractortalks.com