Oil, oil, and more oil?

ericchiesa

New member
Jan 26, 2018
12
0
0
Cocoa, florida
3 Questions please... my L260s main gear case calls for 18 qts of #80 gear oil! Will 80w 90 work? Much easier to find and also cheaper. Engine oil just says 30w does that mean diesel 30w or standard 30w? My other issue is the hydraulic tank calls for something called turbine oil #140! My Napa guy has never even heard of #140! Any help would be appreciated trying to change out all fluids. You guys are awesome!! Thanks for all your help in advance. E
 

100 td

Active member

Equipment
B21TLB (B21, TL421 & BT751) Toyota SDK4 T116 Bobcat
Aug 29, 2015
1,776
8
38
ɹǝpunuʍop
My personal thoughts
Diesel oil, 15w/40, 10w-30, 30, or whatever is on the shelf. Your location/temps, 15w40, stock standard diesel mineral oil.
80/90 will work, it's a bit heavier, 75/90 would also work, turbine 140, IIRC it's somewhere around 80/90. Personally I'd probably go with 75/90 in everything except engine. Kubota UDT would also be a option.

North Idaho Wolfman, whitetiger, others may chime in and give you something different, that's ok, everybody does it a little differently.
 

Russell King

Well-known member

Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
Jun 17, 2012
4,715
1,013
113
Austin, Texas
On my L185 it say something similar for transmission (which is also 3 point hydraulic reservoir). I switched to UDT then to universal tractor fluid and have had no problems.

Engine oil must be diesel rated as has been stated already.


Sent from my iPad using Tapatalk
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,920
5,281
113
Sandpoint, ID
You can use UDT or UDT equivalent in everything except the engine.
Engine 15w40, 5w30, or 5W40 will all work.