Carrying out a service on the Kubota B7001D we just got and the oil filter doesn’t fit as the frame is in the way, tried the recommended one from Kubota specialist and one that was given to us with the tractor. Anyone else encountered this problem?
Oil filter doesn’t fit
- Thread starter KB7001D
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Right next to the injection pump facing up stamped into the flat will be the engine model and serial number.
It had a filter on it to start, what is that filter make and number?
That is a super common filter.
www.oilfilter-crossreference.com
It had a filter on it to start, what is that filter make and number?
That is a super common filter.
Kubota 15241-32090 - alternative oil filters
Find alternative oil filters for Kubota 15241-32090. 536 replacement filters for Kubota 15241-32090.
www.oilfilter-crossreference.com
Did the filter you took off have any identifying information on it?
If not could you take it to a dealer and see if they have one that would match up?
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
That D750 is the stock engine.
Yes the filter is really close to the frame, but it doesn't matter because the frame to motor does not flex or move.
Yes the filter is really close to the frame, but it doesn't matter because the frame to motor does not flex or move.
Probably any 3" diameter filter with a M20 x 1.5 thread would work.
You'd want the same 'bypass' psi and other features such as 'anti-drain back' if the original called for that.
You'd want the same 'bypass' psi and other features such as 'anti-drain back' if the original called for that.
Last edited:
Hard to tell by the pictures 'camera angles', but could you grind a little off the frame rail ?
I think the 20 X 1.5 thread filters came as 7317 sized, and 3593a size.
The 7317 size is long and thin, the 3593a is short and fat
The 7317 size is long and thin, the 3593a is short and fat
Try HH150-32430 or HH1J0-32430
Part Details | Coleman Equipment
Invest in the best, and protect your engine with Kubota Genuine Filters. Kubota Genuine Engine Oil Filtersuse synthetic fibers to resist hot oil and remo
www.colemanequip.com