I have a 95 b7100hst that I didnt know it had no hydro hook ups. I hear that the plate that bolts on with them was a option. Any body know were I can get one ? Or if you can mount another pump somewhere on the tractor? I know that I could mount a pto pump but rather not do that. The crank shaft has splines on it by the front pulley. Trying to find anything out on these issues from local dealer has been less then satisfying!
No hydro hook ups
- Thread starter northern hunter
- Start date
My old B 7100 had a front pump hooked to the crank that ran the hyd for the loader. As far as I know this was a factory set up.
gktilton
New member
Equipment
79 B7100 w/ FEL, Deere 261 Finish Mwr, Woods M4 Bush Hg, Potato Plow, Cultivator
Do you have anything under your seat that looks like this?
http://www.orangetractortalks.com/kubotagallery/?image=221
Hose on the left is my supply to my loader, hose on the right is the return. This is an old pic, thing is ripped apart for cleaning and paint right now.
http://www.orangetractortalks.com/kubotagallery/?image=221
Hose on the left is my supply to my loader, hose on the right is the return. This is an old pic, thing is ripped apart for cleaning and paint right now.
I will have to take a look! I know that when I talked to the dealer they said there was a plate that would be on that trans. tunnel on the right side! I see that your tractor is a manuel trans that might be the differance ! Thanks for all your help !