New and saying hi

Torinodan

Active member

Equipment
T1600 X2, G4200, G5200, Ford 2810
Oct 14, 2021
157
68
28
Fayetteville GA
Not new to orange but new here.

I have a T1600, G4200 gear, G4200 HST, and a G4200 HST. 3 out 4 have decks and all run good with varying degrees of rust and natural patina.
I only have only mower with a deck that just brings hate and discontent and that I'm definitely going to bug someone about.

It's on the 5200hst and the deck is a RC48-G20 with the correct links and extensions but I can't get it set right without maxing everything out to the point of only an uncomfortable amount of threads remaining to hold things together. So if anyone has the measurements for the links please let know. Again, hello to everyone I'm I'm going to look around and find some more answers.
20210907_202624.jpg
20210907_202607.jpg
20211012_211359.jpg

20210926_150448.jpg
 
  • Like
Reactions: 1 user

bird dogger

Well-known member
Vendor Member

Equipment
Kubota B2650 and lots of other equipment
Feb 24, 2019
1,569
1,409
113
North Dakota
Those are really "Cool"! And welcome to OTT also!!
 
  • Like
Reactions: 1 user

Torinodan

Active member

Equipment
T1600 X2, G4200, G5200, Ford 2810
Oct 14, 2021
157
68
28
Fayetteville GA
20210912_125632.jpg

New pan patch for the RC44 that I fabed up. Like all of them the repaired are done in sections. I have redone the 44 inch decks on both the G4200 and T1600. I hadn't touched the 48 yet till I get all the adjustments worked out and a new tension pulley too.
 
  • Like
Reactions: 1 user