SpokaneDude
Member
Equipment
BX2350, FM 125 tiller, Land Pride blade, BotaProducts fuel & HST filter mods
Hello... I purchased the above tiller from Betstco (big mistake!) and less than 8 hours of use, the chain broke. I contacted the seller, but so far, no cooperation, even tho' it's fully covered under warranty. They did send me a new chain and gasket, but didn't take measures to ensure the gasket would not be damaged.. it was damaged beyond repair and is not usable.
So, I decided to attempt to fix it myself. The so-called Manual that was sent with this tiller is NOT for this model, so when attempting to put it back together, there is NO image or parts diagram for the spring that goes on the idler arm. The images show the spring I am concerned about; what do I do with the long part on the end of the spring? Sorry for the images; they are better if you look at the full size. (this is the first time working with images on this forum)... Thanks in advance..
So, I decided to attempt to fix it myself. The so-called Manual that was sent with this tiller is NOT for this model, so when attempting to put it back together, there is NO image or parts diagram for the spring that goes on the idler arm. The images show the spring I am concerned about; what do I do with the long part on the end of the spring? Sorry for the images; they are better if you look at the full size. (this is the first time working with images on this forum)... Thanks in advance..
Last edited: