Ok,good people, A just bought a new to me B2320. Love the tractor. Came with a FEL I would like to buy aMM mower deck for it.I am pretty versed with tractors. when a lower my 3pt I don't see anything under the center of the tractor that would raise and lower it. I hope I am not asking a dumb question. I came from a Simplicity Legacy XL diesel 4X4 thar I had for 15 years. Just wanted something a little bigger, and maybe easier to get parts for. any help would be appreciated. thanks.
Need alittle help please
- Thread starter leonard65
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Finding a RCK60-29B and all of thee linkage hardware for a 20 year old tractor is going to be quite a challenge!
The lift linkage uses the three point to lift it.
The lift linkage uses the three point to lift it.
Butch
Active member
Equipment
Kubota 2410, RC60-24B, FL1000- kubota hydrolic front snow blade- plug aerator
Good Luck on finding the subframe linkage. I have a B2410 of the same vintage and wanted to put a a loader on it.... could get the loader.... but finding a subframe was not going to happen.
Yeah, you know when I did some research on this tractor before I bought it, they claim the B2320 was made between 2008 and 2015. the add said 2017 which is how they are dated by the year they were sold. So I figured getting a MMM no problem, Wrong ! You guys think my rear PTO will spin a 60 inch deck ? or get a 48 inch deck? Thanks.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
You can run a 60" mower.
Send a PM to @Mountainman just in case he might have one that he could sell you.