MX5400 ROPS armrest

lgeist04

New member

Equipment
MX6000 HSTC, LP RCF2060, LP SGC1060, Woodland Mills WG24, Titan forks.
Jan 2, 2020
19
5
3
Soldier ks
I just traded my L2501 in for a NEW MX5400 ROPS. It has the third function, two remotes, rear wheel weights, rimguard, rear work light kit and I got it with the Landpride SGC1060 grapple. I asked my dealer about getting armrests for the seat and they say they can't get them for the open station. I have read a few other places that you can get them for the open station seat but can't find a part #. Can anyone help me out?
 

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25TLB
Feb 9, 2021
4,067
4,621
113
NW Montana
I just traded my L2501 in for a NEW MX5400 ROPS. It has the third function, two remotes, rear wheel weights, rimguard, rear work light kit and I got it with the Landpride SGC1060 grapple. I asked my dealer about getting armrests for the seat and they say they can't get them for the open station. I have read a few other places that you can get them for the open station seat but can't find a part #. Can anyone help me out?
The arm rest kit I ordered and received for the MX6000 open station has part number ZG1341. There's no image available but Messicks and others list the arm rest kit.

Kubota Accessories: SEAT ARM REST KIT, Part # ZG1341 (messicks.com)

And congratulations on the MX5400. It's a lot more capable than your L2501.
 
  • Like
Reactions: 1 user

lgeist04

New member

Equipment
MX6000 HSTC, LP RCF2060, LP SGC1060, Woodland Mills WG24, Titan forks.
Jan 2, 2020
19
5
3
Soldier ks
The arm rest kit I ordered and received for the MX6000 open station has part number ZG1341. There's no image available but Messicks and others list the arm rest kit.

Kubota Accessories: SEAT ARM REST KIT, Part # ZG1341 (messicks.com)

And congratulations on the MX5400. It's a lot more capable than your L2501.
Thank you. I am looking forward to it. It should be ready in a couple of weeks. The L2501 just didn't have enough lift and weight in its pants to do what I needed. It was a good tractor though. The MX just from the little I drove it still seemed to be very maneuverable which was one of my concerns since my property has lots of trees.
 

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25TLB
Feb 9, 2021
4,067
4,621
113
NW Montana
The MX just from the little I drove it still seemed to be very maneuverable which was one of my concerns since my property has lots of trees.
The turning radius for these MX tractors is incredibly small. They basically turn on a dime. You'll love it.

Good that you're getting wheel weights. They make a big difference.
 
  • Like
Reactions: 1 user

rc51stierhoff

Well-known member

Equipment
B2650, MX6000, (BX sold)
Sep 13, 2021
1,899
2,043
113
Ohio
I believe it’s the bevel gear…if you use the brakes in conjunction with steering it’s impressive…although the shear size will take up more space and if you have a bush hog hanging off 10ft behind plus a loader out front that is even more room, but it’s almost unbelievable how maneuverable the Mx are. Aside from the shear difference in size my feels like it steers in same space as my B….feels not actual…it’s a bit bigger but you get my drift. Congratulations on the MX. Before you go through with the armrests maybe check if anyone has them and if in the way of the rear remote levels. I opted not to add the tests as it seemed like it would make a bit awkward to reach the levers…but I never found one to sit on to try that had the levers added…I may add later. Please update on that if you’d add the rests. Happy new year!
 

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25TLB
Feb 9, 2021
4,067
4,621
113
NW Montana
I've got three rear remotes and arm rests on both MXs and I would rather have them than not. I don't have a problem accessing the levers, even with the rests down, and they make the tractor more comfortable. You don't always have to put them in the down position if you feel they're a nuisance, but there are times when you don't need to access the remotes such as running a rotary cutter or mower or doing loader work and it's nice to have a place for the elbows.
 
  • Like
Reactions: 1 user

UpNorthMI

Well-known member
Lifetime Member

Equipment
L3200, L3901, MX5800, SVL75-2, KX040
May 12, 2020
850
564
93
Up North, MI
Another option

 
  • Like
Reactions: 1 user

jyoutz

Well-known member

Equipment
MX6000 HST open station, FEL, 6’ cutter, forks, 8’ rear blade, 7’ cultivator
Jan 14, 2019
2,458
1,565
113
Edgewood, New Mexico
I just traded my L2501 in for a NEW MX5400 ROPS. It has the third function, two remotes, rear wheel weights, rimguard, rear work light kit and I got it with the Landpride SGC1060 grapple. I asked my dealer about getting armrests for the seat and they say they can't get them for the open station. I have read a few other places that you can get them for the open station seat but can't find a part #. Can anyone help me out?
Nonsense. I just bought a MX6000 open station and asked the dealer to throw in armrests. The dealer installed them before delivery. Go to the Kubota machine builder site and you will see they are a factory option for about $100. Seems like your dealer isn’t very knowledgeable about their products.
 
  • Like
Reactions: 1 user

Cranblue

Member
Feb 23, 2019
62
10
8
Lincolnton NC
I just traded my L2501 in for a NEW MX5400 ROPS. It has the third function, two remotes, rear wheel weights, rimguard, rear work light kit and I got it with the Landpride SGC1060 grapple. I asked my dealer about getting armrests for the seat and they say they can't get them for the open station. I have read a few other places that you can get them for the open station seat but can't find a part #. Can anyone help me out?
On my L4701 I used Tractorseats.com they have arm rest my seat had dimples in it for mounting didn’t do price comparison with Kubota.
 

lgeist04

New member

Equipment
MX6000 HSTC, LP RCF2060, LP SGC1060, Woodland Mills WG24, Titan forks.
Jan 2, 2020
19
5
3
Soldier ks
I have had the tractor for a couple of weeks now and I love it. Thank you for the help with the armrest my dealer finally got them for me after I went back and forth with them on whether you could even get them or not.
0B0D73CA-A088-4A33-9CA6-1554754D3CE2.jpeg
3F3C9CFD-E347-49B3-85C5-35C6081140FA.jpeg
 
  • Like
Reactions: 1 user

jyoutz

Well-known member

Equipment
MX6000 HST open station, FEL, 6’ cutter, forks, 8’ rear blade, 7’ cultivator
Jan 14, 2019
2,458
1,565
113
Edgewood, New Mexico
I have had the tractor for a couple of weeks now and I love it. Thank you for the help with the armrest my dealer finally got them for me after I went back and forth with them on whether you could even get them or not. View attachment 74430 View attachment 74431
IDK why the dealer had an issue with that. I told my dealer I wanted them on my MX6000 and he installed them before delivery. FYI, if you are interested I found a seat cover that fits these seats with armrests. Durafit model KU25. The Durafit website says that model fits a B series, but when I called them they said it also fits the MX with arm rests.
 

SDT

Well-known member

Equipment
multiple and various
Apr 15, 2018
3,084
923
113
SE, IN
Nonsense. I just bought a MX6000 open station and asked the dealer to throw in armrests. The dealer installed them before delivery. Go to the Kubota machine builder site and you will see they are a factory option for about $100. Seems like your dealer isn’t very knowledgeable about their products.
Agreed. Sounds like OP's dealer does not want to be bothered.

SDT
 
  • Like
Reactions: 1 user