Mower and 3 pt. hitch won't lift

garett66

New member
Sep 2, 2016
5
0
0
42
Deemston PA
I was wondering if anyone has ever had an issue with a BX25 belly mower and 3-point hitch not lifting. All other hydraulics work. Linkage is good. Raise and lower speed knob might be the issue. Not sure where to go from there


Sent from my iPhone using Tapatalk
 

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
10,421
2,212
113
Bedford - VA
Make sure that knob is NOT in the TOP position.......wrap a rag around if hard to turn.
Check fluid level? BH hooked up? if not - bypass hose connected??
 

garett66

New member
Sep 2, 2016
5
0
0
42
Deemston PA
Yes backhoe is connected. FEL and Hoe both work fine.

I found that the speed knob unthreaded out completely. I'm assuming that the clip retaining ring broke and spring and ball went flying when the stem came all the way out.


Sent from my iPhone using Tapatalk
 

garett66

New member
Sep 2, 2016
5
0
0
42
Deemston PA
Update: tore into the tractor today. Found that the 3pt. Hitch/ deck lift speed stem came all the way out retaining ring was gone spring and ball bearing was missing behind the stem. I got those parts ahead of time just in case. Going to reassemble the tractor tomorrow. Fingers crossed.


Sent from my iPhone using Tapatalk