Model 1200 Loader for L245 Manual Needed

[bPlust]

Hi all,

Long time listener, first time caller here.

I'm working on a friend's L245DT that is outfitted with a 1200 FEL, and need to reseal the bucket cylinders.

When I called my local Kubota dealer requesting parts diagrams, they drew a blank regarding even acknowledging the existence of the model 1200 FEL. They said they couldn't find it in their system.

I feel that I found my part number right here (see post #6):

http://www.orangetractortalks.com/forums/showthread.php?t=7632

When I plug this number into the MB Tractor website, it directs me to the L2773. Did the L2773 and the L245 have the same optional loader?

If anyone has a parts manual, I would greatly appreciate a copy of it.

Thank you all for your time and this excellent website,

Bryan

 

[bPlust]

Mods- if this is the incorrect place for this thread, please move as needed.

Thank you,

Bryan

 

[D2Cat]

Bryan, you will most likely find what you need a lessor cost at a hydraulic repair shop then a Kubota dealer. Dis-assemble the cyl and take the parts with you. I find they can usually reassemble the thing and know it's right at a very reasonable cost.

If you absolutely want a Kubota part number I'd call these folks, because they are a big dealer with three stores. http://www.colemanequip.com/Kubota_Parts.asp

 

[100 td]

A manual here with diagrams and part numbers, whether they correlate to anything any more........
http://www.kubotabooks.com/AutoInde...s/&file=1200 Loader for L series tractors.pdf

 

[North Idaho Wolfman]

When I plug this number into the MB Tractor website, it directs me to the L2773. Did the L2773 and the L245 have the same optional loader?

An L2773 is not a tractor it's a loader, so yes maybe the L2773 loader had the same cylinders as the Model 1200.

P/N 70050-00299
http://www.colemanequip.com/parts/KubotaParts/70050-00299/

P/N 70050-00301
http://www.colemanequip.com/parts/KubotaParts/70050-00301/

 

[bPlust]

Hi everyone,

I haven't visited here in a bit, but I just wanted to pop in and say a big "Thank you!" to everyone who replied. I got the kit and will be installing it soon.

Thanks again,

Bryan