Maximum implement weight for the L2501?

LMTractorGuy

Member

Equipment
L2501HST, LA525, RCR1260, BB1260, Titan 48" SS Forks, Stump Bucket
Sep 20, 2016
70
1
8
SC
I think it is in the owners manual, which I do not have. Not asking about the Lift Capacity at lift points of 1918 lbs. and 1389 lbs. 24" from lift points. I wonder if the L3301 and L3901 are the same for maximum implement weight? A picture from the owners manual would be great if possible. Thanks.
 

LMTractorGuy

Member

Equipment
L2501HST, LA525, RCR1260, BB1260, Titan 48" SS Forks, Stump Bucket
Sep 20, 2016
70
1
8
SC
I could not find it in the sales literature. My dealer found it in the owners manual. I believe he said 770 lbs. for the rotary mower on the L2501. I varies by implement type he said. They are almost twins, but here are some differences listed on the Kubota website under specifications. 3 point lift capacity varies slightly and forward and reverse ground speeds are different all three HST models. Pump capacity is less on the L2501. The way the specs are listed on Kubota's site leads you to believe the L3301 does not have postition control. Could this be the case? I have highlighted some differences in the pics.
 

Attachments

Last edited:

LMTractorGuy

Member

Equipment
L2501HST, LA525, RCR1260, BB1260, Titan 48" SS Forks, Stump Bucket
Sep 20, 2016
70
1
8
SC
Yes. Those are the exact pages I wanted to see. Thank you very much. I was very curious because of the OTT thread I read "Kubota B3350 Sold with Wrong Implement". I wanted to make sure the implements I was getting with the L2501 were not too large for the tractor.
 
Last edited:

BCrouse

New member
Jul 30, 2016
196
0
0
PA
Yes. Those are the exact pages I wanted to see. Thank you very much. I was very curious because of the OTT thread I read "Kubota B3350 Sold with Wrong Implement". I wanted to make sure the implements I was getting with the L2501 were not too large for the tractor.


Because of how torquey the L engines are and their heavier weight, IMO some of those specs are under what they should be. But its the safe route.

When I bought my 3301, I got a lighter duty 5' bushhog (BH5) with it. I KNOW now I could have gotten either a medium duty one or a wider light duty one. But I was following the recommendations of the dealer. I havent been disappointed with the quality of cutting with it, I do question how long it will last given the amount of rock in my area though. Learning occurred.
 

sheepfarmer

Well-known member
Lifetime Member

Equipment
L3560, B2650, Gator, Ingersoll mower
Nov 14, 2014
4,438
677
113
MidMichigan
Yes. Those are the exact pages I wanted to see. Thank you very much. I was very curious because of the OTT thread I read "Kubota B3350 Sold with Wrong Implement". I wanted to make sure the implements I was getting with the L2501 were not too large for the tractor.
Those pages are for the 3301 and 3901. To be certain you need to see what is in the manual for the L2501. You can stop by your dealer and get the manual before the tractor is ready to be delivered, a good idea anyway so that you can ask questions when it is delivered.
 

LMTractorGuy

Member

Equipment
L2501HST, LA525, RCR1260, BB1260, Titan 48" SS Forks, Stump Bucket
Sep 20, 2016
70
1
8
SC
I stopped by my dealer and he looked up the weight limitation for the rotary mower on the L2501. It is also 770lbs, same as L3301 and L3901.