Low High Shift

[j.mann64]

Hello all,

I am new to this site. I have a L3000DT and have had no problems up until today when there is 3 feet of snow in my driveway.
The high-low gear shift is loose and not engaging the gears at all. Just flops from front to back with no resistance. I can see the lever range shift moving with the gear shift. See attached pics.
Any thoughts on what this could be? If so what is the fix?

Thanks in advance!

 

[Bulldog]

It's hard to see in the pics but is that a roll pin I see. If so that would be the first thing I would check just because it's the simplest place to start.

 

[j.mann64]

Yes it is a roll pin on the end of the shift. That pin is intact and it seems like the part it is attached to is rotating with the gear shift.

thanks

 

[jmann]

It's a little weird when someone joins the forum who has a very similar name... but welcome anyway!

 

[Bulldog]

If the external parts are all in working order it doesn't sound like a very easy fix. Looks like the shifter is linked to a internal shift fork. I bet that's going to be your trouble. Maybe some of our OTT service dept guys will jump in on this one with some first hand knowledge.

 

[DUO_CORE]

Did this ever get resolved and what is the fix.

I have a L 3000 DT and am experiencing the same thing.

I'm stuck in high gear and 4wd seems stuck on.

Thanks,

Ed