LED Work Lights

UnionMan

New member

Equipment
M5-111HDC12, L3800 HST , RTV-X1100C, SCAG TigerCat 61" Kawi FX Motor
Aug 21, 2013
104
0
0
Warrenton, VA
I’ve been looking at all the threads on hear of everyone’s custom mods on their tractors and wished I had the workshop and skills to match.

I recently purchased a L3800 and have gotten some great use out of the tractor but I noticed one night when I was finishing up some fence lines the other night that the headlights are very poor at that, and the FEL and bucket doesn’t help for that matter. I’ve seen a bunch of posts on LEDs that people clamp on to the ROPS. It seems they purchase them online on such sites as amazon. I’m not too knowledgeable about LEDs and know the difference in the types. Some are listed as CREE LEDs?

I would like to Mount two forward facing LED lights and two rear facing on the ROPS. I feel that I should get plenty of light out of that setup. The other day at Walmart walking by an aisle I saw they had LED driving lights that didn’t seem too bad of a price. Looked to be $33 for a set of two lights. The brand is “Platinum Burners LED Lights” I can’t seem to find much about them and was wondering if anyone had heard of them or knew the specs on them. The box didn’t have too much info on them.

Does anyone have recommendations on LED lights or advice to share?


UnionMan
 

ck21084

New member

Equipment
L3200-DT, LP 1672,B7100 enrossi 5ft finish mower, 7ft backblade, 20"subsoiler
Jul 6, 2013
45
0
0
United States
I am in the middle of this upgrade right now. I purchased an led bar from amazon from a seller by the name of all good led. This bar is extremely bright. It's states 7200 lumen and it appeared to be correct. Below is a picture last night. The person in the picture is my brother and he is standing at around 200ft away. He is that tiny dot in the center. He is 6'6" to give you a distance perspective.



Sent from my iPhone using Tapatalk
 

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
11,072
2,992
113
Bedford - VA
I’ve been looking at all the threads on hear of everyone’s custom mods on their tractors and wished I had the workshop and skills to match.

I recently purchased a L3800 and have gotten some great use out of the tractor but I noticed one night when I was finishing up some fence lines the other night that the headlights are very poor at that, and the FEL and bucket doesn’t help for that matter. I’ve seen a bunch of posts on LEDs that people clamp on to the ROPS. It seems they purchase them online on such sites as amazon. I’m not too knowledgeable about LEDs and know the difference in the types. Some are listed as CREE LEDs?

I would like to Mount two forward facing LED lights and two rear facing on the ROPS. I feel that I should get plenty of light out of that setup. The other day at Walmart walking by an aisle I saw they had LED driving lights that didn’t seem too bad of a price. Looked to be $33 for a set of two lights. The brand is “Platinum Burners LED Lights” I can’t seem to find much about them and was wondering if anyone had heard of them or knew the specs on them. The box didn’t have too much info on them.

Does anyone have recommendations on LED lights or advice to share?


UnionMan
look at this .....total spent - about $120 bucks .......

http://www.amazon.com/LED-LIGHTS-Sq...63622&sr=8-3-spell&keywords=led+offroadlights
 

Attachments