L3600 Snowblower

[lakergrad]

Hello all -

New to the tractor world and my L3600. Looking for advice on fitting a front mount blower. I’ve searched everywhere and cannot find any info

Thanks!


Sent from my iPhone using Tapatalk

 

[North Idaho Wolfman]

You'll need the mount and the right blower:

It's not going to be an easy combination to find, and they normally go for big bucks when they do sell.

Mount L2054B
Snowblower L2052-1

Here is an old listing for the setup so you can see it:
https://www.equipmentfacts.com/list...l2052-1-front-mount-snowblower-w-l2054b?lp=TH

 

[lakergrad]

Thanks Wolfman. Have you seen any fabrication attempts to convert another blower for use on a 3600? I found the mount, but not the blower. Appreciate your thoughts! Thx

 

[North Idaho Wolfman]

Thanks Wolfman. Have you seen any fabrication attempts to convert another blower for use on a 3600? I found the mount, but not the blower. Appreciate your thoughts! Thx

If you can get the mount, that's the hard part to get, there are actually several blowers that use the same mount.

You can convert a three point blower to work on the front you just need the female mount and the gear reduction box.

 

[lakergrad]

If you can get the mount, that's the hard part to get, there are actually several blowers that use the same mount.



You can convert a three point blower to work on the front you just need the female mount and the gear reduction box.

Thanks. Do you happen to know what other model number blowers will fit the 2054 mount?

Also, any idea are there non-Kubota (aftermarket) options out there for a front blower for the 3600!

Thanks for sharing your knowledge. Really appreciate it...