My Land Pride 1860 cutter seems too heavy for my L3200 tractor. Even with 4 weights on the front of the tractor it seems way too unsteady when the cutter is lifted. Front wheels often skid when i try to turn.
Also, the cutter is about 6 inches wider than the rear wheels on the tractor and the cutter seems to dig in anytime i am cutting sideways on a small slope.
it seems like if the cutter didnt stick out past the wheels, it would follow contours better.
Any thoughts?
Also, the cutter is about 6 inches wider than the rear wheels on the tractor and the cutter seems to dig in anytime i am cutting sideways on a small slope.
it seems like if the cutter didnt stick out past the wheels, it would follow contours better.
Any thoughts?