My tractor is having a serious problem with reverse and I am clueless as to what/why it is happening. When I put it in reverse, I am no longer getting anywhere near the speed I had been getting. It’s down to less than half a mile per hour. Hydrostatic transmission, forward seems fine. Changing from low to medium I get increased speed going forward but no change in reverse.
L3010 losing reverse
- Thread starter Tenalach Farms
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Could be as simple as a linkage issue, or could be as serious as an HST failure.
Good starting point would be reading the trouble shooting section in the WSM (aka Service Manual).
If you don't have the WSM just ask.
Good starting point would be reading the trouble shooting section in the WSM (aka Service Manual).
If you don't have the WSM just ask.
Workshop service manual totally overloaded my poor brain with more information than I could wade through
But that was when I was trying to get basic information about operating and owner service stuff. I'll revisit for this specific topic and see where it gets me Thank you.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Look at page 3-NS6
If that doesn't fix it, then you'll need to take it to a dealer to test the pressures.
It could very well be a damaged relief valve.
Fairly easy external repair.
If that doesn't fix it, then you'll need to take it to a dealer to test the pressures.
It could very well be a damaged relief valve.
Fairly easy external repair.