Ok, bought a L245DT (no front end loader) in the spring. PTO lift worked ok early, then began to squall when lifting a load. I decided I wanted to change all the fluids. Drained the trans/hyd, read a little bit and refilled with an 80w90. Worked ok immediately after changing, then nothing, won't pick up, no squalling, nothing. Got concerned shoulda went with the thinner THF instead although no FEL and nothing i read really confirmed this, just thought the previous owner may have ran THF so should probably continue.
Changed it again with THF, but nothing. Took a look at the relief valve, cleaned reinstalled looked good. Where do I go now?
Changed it again with THF, but nothing. Took a look at the relief valve, cleaned reinstalled looked good. Where do I go now?
