l1500dt loader hydrualics

[david f]

Hey everyone. finally got the loader on. Was hoping someone could tell me what pressure I should set the reilf valve on the loader control at? What psi can the pump put out? I tried out the loader with the pressure set @ 2000 hope this was not to high. I read some where on this site that too high of pressure could blow a seal in hydraulic pump, or was it between pump and housing?(l1500dt)

 

[traildust]

Hey everyone. finally got the loader on. Was hoping someone could tell me what pressure I should set the reilf valve on the loader control at? What psi can the pump put out? I tried out the loader with the pressure set @ 2000 hope this was not to high. I read some where on this site that too high of pressure could blow a seal in hydraulic pump, or was it between pump and housing?(l1500dt)

I remember reading that the L1500 was the equivalent of the L175.
Here is a link I found that says the L175 Hydro pressure is 1700psi.

Hope this helps. Other guys that have been doing pressure checks will probably jump in soon.

Good luck,
Scott

 

[david f]

Thanks, Yes it does. every bit of info helps.

 

[traildust]

Thanks, Yes it does. every bit of info helps.

YEAY! Thanks David

Side stepping the topic, my company used to send me to Honolulu and Hilo every year. Bummer is our regions shifted under management and now I don't go anymore

Hilo was my favorite. I would have liked to visit your little island. But I don't think that will happen again.

Have a nice day and good luck with your tractor,

Scott