Kx71 dipperstick dimensions

[jovol]

Hello, would anyone with a KX71 be willing to take some measurements of the dipperstick arm? I have an old 80s rebranded Kubota KH70 with a twisted dipperstick arm (pick attached), and would like to replace it with a used one for less than a fortune. Perhaps the arms are compatible...

 

[rentthis]

I have several. What measurements do you need?

 

[jovol]

Ok I attached photos with the relevant dimensions. I think the length of the stick isn't important, as long as it's roughly close. One big issue I just realized is that all my pins are 1.5", and results online show the Kx71 using 35mm.

 

[jovol]

I was wrong on pin size. The dipper stick pins are 40mm. The boom pins are 45mm but that doesn’t matter for now.

 

[jovol]

If someone could do the measurements on a kx91 or kx121.. you'd be a life saver. I believe the kx71 has 35mm pins, whereas the 91 and 121 have 40mm.