Kubota p# 70050-00818

[Stumpsplitter1962]

This part/ the front pto shaft is discontinued, cannot find. Wondering if anyone has any idea how to proceed. The shaft is connected to a L355ss /w/a 1720 loader. The shaft that stripped is female/ and slid over the tractors male pto ( which is not damaged ). Part number 70050-00818 is no where to be found

 

[Russell King]

I imagine you will have to get that manufactured by a machine shop.

There is a member here that has a salvage yard that might have it but they are rare. Try to send @007kubotaguy a message

 

[Stumpsplitter1962]

I imagine you will have to get that manufactured by a machine shop.

There is a member here that has a salvage yard that might have it but they are rare. Try to send @007kubotaguy a message

Thanks RK.

 

[TheOldHokie]

This part/ the front pto shaft is discontinued, cannot find. Wondering if anyone has any idea how to proceed. The shaft is connected to a L355ss /w/a 1720 loader. The shaft that stripped is female/ and slid over the tractors male pto ( which is not damaged ). Part number 70050-00818 is no where to be found

This issue crops up on a regular basis. I would advise you replace that drive shaft with a shop made one.

However matching the splines on the tractor will be EXPENSIVE. Much cheaper to make a simple plain bore keyed hub to fit over the splines and bolt it to the crankshaft pulley. The rest is nothing but common off the shelf components.

Dan

 

[007kubotaguy]

I don't have a shaft..I have converted many of them to run of the tractor hydraulics. Just as much power but a little slower.

 

[Russell King]

@Stumpsplitter1962

this showed up and may be exactly what you need (if it is really a good lead)

B6100-B7100 Parts

came across these for a vintage Kubota - no affiliation https://newhaven.craigslist.org/grd/d/shelton-kubota-pto-clutch-shaft-and/7774438839.html

www.orangetractortalks.com

 

[North Idaho Wolfman]

@Stumpsplitter1962

this showed up and may be exactly what you need (if it is really a good lead)

B6100-B7100 Parts

came across these for a vintage Kubota - no affiliation https://newhaven.craigslist.org/grd/d/shelton-kubota-pto-clutch-shaft-and/7774438839.html

www.orangetractortalks.com

The B's have a much smaller crank and that adapter doesn't fit an L.