Kubota b6000

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
34,008
9,221
113
Sandpoint, ID
TRANSLATED:
Does it matter what engine the Kubota b6000 feeder is equipped with if I put it back in the stationary position?

I'm not understanding your question, please elaborate.

Nem értem a kérdésedet, kérlek fejtsd ki bővebben
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
34,008
9,221
113
Sandpoint, ID
No you do not need to mark the flywheel, just make sure you use the same exact shims under the pump as that is what sets the timing.
Do not use sealer on those shims either as that will change the thickness and the timing.

Nem kell megjelölnöd a lendkereket, csak ügyelj arra, hogy pontosan ugyanolyan alátéteket használj a pumpa alatt, mivel ezek határozzák meg az időzítést.

Ne használj tömítőanyagot ezeken az alátéteken sem, mert az megváltoztatja a vastagságot és az időzítést.
 
  • Like
Reactions: 1 user

kalapacs

New member

Equipment
kubota b 6000
Jan 3, 2025
12
1
3
Magyarország
thanks for the answer.
i have one more question, after replacing the injectors the engine doesn't consume oil. but it smokes blue, what could it be?