KUB206 or KUB215

[sandiegomark]

my b6000 FEL cylinders are leaking badly. Anyone know source for replacement cylinders. KUB044 and KUB045 I believe these are the cylinder numbers. Thanks for helping

 

[North Idaho Wolfman]

my b6000 FEL cylinders are leaking badly. Anyone know source for replacement cylinders. KUB044 and KUB045 I believe these are the cylinder numbers. Thanks for helping

Leaking cylinders usually just need new seal kit installed, if you don't want to do them yourself, your next best bet would be find a local or semi local cylinder shop and have yours rebuilt.

 

[sandiegomark]

hello, thanks for the response. do you know the seal kit number or where to find the right seal kit?

 

[shootem604]

You may not even need the Kubota seals - your local hydraulic shop probably can replace them with standard off the shelf seals.

 

[sandiegomark]

Re: KUB206 or KUB215 seal kit

Hello shootem604, thanks for your response. I noticed on one of the older post on the forum that a newer backhoe cylinder had the same seal kit that my FEL calls for. That would be huge if all the 2" cylinders that Kubota made could use the same kit. Coleman, Messick's have them for about 20 bucks. Thanks again, San Diego Mark

 

[shootem604]

I depends on who made the cylinder. My backhoe was built for Kubota by Woods and they used Energy or Lantex cylinders - luckily both used the same seals, but no so for my made for Kubota Arps built FEL cylinders.