Installing a MMM Deck on a B3200

[tjaltz]

I purchased a used RCK60-27ba mower deck for my 2009 B3200HST. The deck came with all the brackets and hangers, but no installation manual. My tractor also has a backhoe subframe installed. Does anyone know where I can get an installation manual for this deck? Does it require drilling the tractor or backhoe frame, or are all of the necessary holes already there? Any installation tips from anyone who has installed one of these? Thanks for your help.

 

[whitetiger]

I purchased a used RCK60-27ba mower deck for my 2009 B3200HST. The deck came with all the brackets and hangers, but no installation manual. My tractor also has a backhoe subframe installed. Does anyone know where I can get an installation manual for this deck? Does it require drilling the tractor or backhoe frame, or are all of the necessary holes already there? Any installation tips from anyone who has installed one of these? Thanks for your help.

Check your private messages.

 

[Sammy3700]

I installed a mmm on my neighbors B3200 he went online Messicks I think and found the paperwork if you need any pictures PM me and I will text them. No help as far as backhoe but we also installed a FEL

 

[lugbolt]

i am not 100% positive but I "Think" that backhoe and belly mower don't play together on B3200. Correct me if I'm wrong.

 

[tjaltz]

i am not 100% positive but I "Think" that backhoe and belly mower don't play together on B3200. Correct me if I'm wrong.

You are correct. The backhoe sub frame and the MMM can both be on at the same time, but the backhoe cannot be mounted onto the sub frame with the MMM. The lift arms for the MMM go over the top of the 3 point lower link arms. The lower link arms and lift rods have to be removed to mount the backhoe. You can pin the MMM up so it’s out of the way when you use a 3 point implement. I think you can also leave it pinned up and remove the lower connecting arms & lift rods to install the backhoe, but I would prefer to just remove the mower deck.