Where can I get a cylinder like this? Maybe I need a smaller one? I have a 40y/o L355SS and use a brush hog, spike, and box blade. I will probably add a rake and rent a tiller or disc. Our local hydraulic store wanted $600 to fix and I think I have seen them around $175-$225. Ideas?
Hydraulic Top Link, Cat 2, 3" x 8"
- Thread starter David-in-OK
- Start date
i7win7
Well-known member
Equipment
BX2370, B2650 grapple, tree puller, trailer mover, 3 point hoist, mower, tiller
cat 2 hydraulic top link - Bing
Intelligent search from Bing makes it easier to quickly find what you’re looking for and rewards you.
Lil Foot
Well-known member
Lifetime Member
Equipment
1979 B7100DT Gear, Nissan Hanix N150-2 Excavator
Surplus Center
Warehouse distributor for many top name manufacturers. Parker Hydraulics, Hypro Pumps, Prince Hydraulics. Direct from the factory. Surplus equipment. We buy large quantities of manufacturer's surplus or excess stock.
www.surpluscenter.com
Here’s a Cat 1 for $133.... and they have Cat 2 for $178.
www.agrisupply.com
But I also have a question for you guys: I see these which have ordinary ports... and then I see others with an interconnect (perhaps incorporating a check-valve?). Which type should I buy?
And does it make sense to buy a Cat2 cylinder and simply bush it for Cat 1 implements so either could be used? (My lift-arms are reversible to accept either.)
Hydraulic Top Link-Tractor, 3 point
Attach this top link cylinder to your 3-point implements. This category 1 cylinder has a retracted length of 20 in. and an extended length of 28.
www.agrisupply.com
But I also have a question for you guys: I see these which have ordinary ports... and then I see others with an interconnect (perhaps incorporating a check-valve?). Which type should I buy?
And does it make sense to buy a Cat2 cylinder and simply bush it for Cat 1 implements so either could be used? (My lift-arms are reversible to accept either.)
Last edited:
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
If you are willing to wait they go on sale at least once a year. Got mine on sale last April. 2.5" bore 10" stroke around $170.
I wish it had a 12" stroke and a check valve. The lack of check valve hasn't been an issue, I'm just finding my snowblower slowly drifting down when not being used.
Last edited:
