Hose protection

frysl

Member

Equipment
L3301 LA525 FEL & FDR1672 6' Finish Mower
Jun 13, 2016
92
16
8
Sumner County, TN
Hi all,
I recently added a third function valve to my tractor and was wondering where I could go in town to pick up some type of protective sleeve I could slide the two new hoses into for protection. I see stuff on line, but I was hoping that maybe someone has seen what I need in a big box store or home town hardware stores.
thanks
 

Elliott in GA

Well-known member

Equipment
LX 2610SU w/535,LP RCR1860,FDR1660,SGC0554,FSP500, DD BBX60005
Mar 10, 2021
633
613
93
North Georgia
I bought the following for my hoses; I put both of them in one large sleeve (velco opening down the entire length). I did this over 2 years ago. The hoses are fine, and it has protected the paint on the tractor. I purchased a 3 foot length, and then I cut it as needed.


My local hydraulic hose supplier did not have anything like it.
 

TheOldHokie

Well-known member
Lifetime Member

Equipment
L3901/LA525, B7200DT/B1630, G2160/RCK60, G2460/RCK60
Apr 6, 2021
6,969
3,358
113
Myersville, MD
windyridgefarm.us
Hi all,
I recently added a third function valve to my tractor and was wondering where I could go in town to pick up some type of protective sleeve I could slide the two new hoses into for protection. I see stuff on line, but I was hoping that maybe someone has seen what I need in a big box store or home town hardware stores.
thanks
Nylon hose sleeve on Amazon. Good price and selection of widths and you will get it fast. Make sure its wide enough to get the end fittings through.

Dan
 
  • Like
Reactions: 1 user

mcfarmall

Well-known member

Equipment
Kubota M5660SUHD, Farmall C
Sep 11, 2013
1,382
1,649
113
Kalamazoo, MI
Outback wrap. I think you can get a discount with a code from Good Works Tractors.
20220122_093306.jpg
 

BXHoosier

Well-known member

Equipment
BX24
Jan 21, 2018
455
514
93
Indiana
I doubt you’ll find any kind of hose sleeve at any big box stores but they might have spiral wrap similar to the Outback Wrap. It should be in the electrical area.
 
  • Like
Reactions: 1 user

The Evil Twin

Well-known member

Equipment
L2501, LA526,
Jul 19, 2022
2,392
2,312
113
Virginia
FWIW, make sure to account for the coupling diameter if you aren't going to take them off for the installation.
 

Kennyd4110

Well-known member
Vendor Member
Sep 7, 2013
1,171
336
83
Westminster, MD
www.boltonhooks.com