HELP Drawbar Question!!!

[WVUalum08]

Hey Guys,
I'm in desperate need of a drawbar for my L3010 (need it for my baler by Thursday evening). I live in Charleston WV and have two dealers close by so i'll be calling them as soon as they open to check but here goes......do the BX series (or any others in the 20-29HP range) Kubotas use the same drawbar and drawbar setup as my L3010. I know a few people with smaller Kubotas and thought about calling them to see but wasn't sure if it'd be the same....any help greatly appreciated!

 

[D2Cat]

The draw bar is simply a piece of iron. Not sure of the size on your tractor, but probably 1" thick x 2" wide and long enough to pin underneath. So the bar needs a couple of holes to pin it to the tractor and a hole for your baler.

This is presuming you have the bracket under the tractor in place.

 

[North Idaho Wolfman]

I do believe the B's and BX's use a smaller bar.

 

[Ramos]

My BX1870 does not have a drawbar. It is more of a plate with a hole in it that is bolted down between two brackets. Nothing that would support any baler I have ever seen.

 

[clay45]

Wonder if its something like this:

http://kscdirect.com/item/PIX+35070-29710/A+%26+I+PRODUCTS_DRAWBAR

 

[D2Cat]

Clay, you win the prize!