A new to me G2460R rider has no spark. The engine is the WG752-ES-24G 3 cylinder gas engine.
I have the WSM for the G2460 mower and it is close to worthless in troubleshooting electrical issues.
With the key switch on, I have 12V at the negative terminal and positive terminal both of the coil. When I crank the engine, the 12v positive remains "on" at both the positive and the negative terminal of the coil. I have tested the resistance of both the Primary coil and Secondary coil and they are within range. When I crank the engine and place the coil wire coming directly out of the top of the coil close to ground, I get no spark.
Any ideas?
Is there a shop manual that is better for chasing electrical issues with this mower?
I have the WSM for the G2460 mower and it is close to worthless in troubleshooting electrical issues.
With the key switch on, I have 12V at the negative terminal and positive terminal both of the coil. When I crank the engine, the 12v positive remains "on" at both the positive and the negative terminal of the coil. I have tested the resistance of both the Primary coil and Secondary coil and they are within range. When I crank the engine and place the coil wire coming directly out of the top of the coil close to ground, I get no spark.
Any ideas?
Is there a shop manual that is better for chasing electrical issues with this mower?