Flywheel Torque

[LDG]

MX5200 with a manual transmission. I need the Torque for mounting the Flywheel & also the Pressure Plate. Thanks

 

[Roadworthy]

If I was going to the trouble of splitting a tractor I'd want to look up the torques for myself from the shop manual. I'm kind of picky that way.

 

[whitetiger]

MX5200 with a manual transmission. I need the Torque for mounting the Flywheel & also the Pressure Plate. Thanks

Here is the info you asked for.

 

[Dave_eng]

I tried to help you but here is what I found.
Kubotabooks has a MX5000 WSM.
I have a WSM for a MX5100
Kubota.ca (Canada) says the MX5200 clutch is used on the following models:

Unless you can get the info from someone with one of the above models or a dealer you will have to buy a WSM.

Dave

p.s. Whitetiger to the rescue..... lucky guy

 

[LDG]

Thanks

 

[lugbolt]

Tight with a 1/2" impact will suffice. probably around 70 foot lb, or like one of my old coworkers said "foot torques"

 

[LDG]

Tight with a 1/2" impact will suffice. probably around 70 foot lb, or like one of my old coworkers said "foot torques"
[/QUOTE)
Thanks