Flashing Safety light

[OBX]

My L 3540 HST safety light on the dash is flashing. I raised the front bucket so I could change the oil an filter. Now when I start it the light flashes. Anyone know why it is doing that and what it means. I lowered bucket it didn't change.

 

[Tooljunkie]

No operator's manual?
Im sure you can find something online if you dont have. Kubotabooks.com may be one place to check.
I have nothing to offer, unless something was accidentally disconnected or brake is on.

 

[sheepfarmer]

Could you describe the light on your dash better? Do you have an intellipanel on yours? I have the wsm for the 3560hst and there is a small chance the error messages are the same, and I can try to look it up.

 

[mdhughes]

My L 3540 HST safety light on the dash is flashing. I raised the front bucket so I could change the oil an filter. Now when I start it the light flashes. Anyone know why it is doing that and what it means. I lowered bucket it didn't change.

On page 52 of the manual it has:

If the HST or GST Transmission malfunctions, the indicator in the Easy Checker(TM) will blink. If this should happen during operation, carefully move the tractor to a safe place, contact your local Kubota Dealer for repair.

It doesn't have anything else that I saw about it.

 

[OBX]

On page 52 of the manual it has:


It doesn't have anything else that I saw about it.

It's the triangle warning light on the left of the panel.

My cruise control went out abt a year ago and I think NOW the safety light is flashing. I called my local dealership where I bought the tractor and they said it was the cruise control error but they it just started flashing is a mystery.

I'm only getting the error code for the cruise control so I guess that is what is causing it.