Farm pro loader

[hank2000]

I am going to install a Farm-Pro loader on my L3000. I know a Kubota has to have an open center control valve not sure what the loader has on it. So how do I tell if it’s open or closed center. I need to know so I will know if I need to change the control valve


Sent from my iPhone using Tapatalk

 

[hank2000]

Yes there are two more hoses on the loader.


Sent from my iPhone using Tapatalk

 

[hank2000]

Yes I’m going to see him after work


Sent from my iPhone using Tapatalk

 

[1970cs]

Some units have a conversion plug that you have to remove and replace with another.

Pat

 

[hank2000]

Some units have a conversion plug that you have to remove and replace with another.



Pat

Thank you that Next question where do tap into the hydroelectrics and what do need to tap into them. Not sure my tractor has the blocks or fittings to do this and would the still be available from Kubota


Sent from my iPhone using Tapatalk

 

[North Idaho Wolfman]

Next question where do tap into the hydroelectrics

It's not Hydroelectrics, it's just the Hydraulics or Hydraulic system.

Does the tractor have power steering?
There is 2 different blocks to tie into the hydraulics, and it depends on if you have PS or not.

NO PS:

PS:

 

[hank2000]

It does have power steering. Thanks for the diagrams


Sent from my iPhone using Tapatalk

 

[maxvolk]

I have a L3000DT with power steering. I do not have a FEL but I do have a hyd. top & tilt Here is a picture hope this will help.