Yep, You are spot on…that’s why I have a p938 too.
. (I don’t use the magazine extensions or I could not get it in my box)EDC question ( Asking for a friend)
- Thread starter skeets
- Start date
. (I don’t use the magazine extensions or I could not get it in my box)A 357mm handgun has good stopping power. Only Walmart is not selling ammunition for them any longer.
Skeet’s, that HK would be my choice for sure. Hammer fired, manual safety and a decocking lever would give me the safety insurance I look for. The one I looked up was a 10 round mag.
I have a p365 with the manual safety. But I can’t get past those striker fired pistols relying on about .030” of a metal pin stopping it from firing. I know, I know, everyone is going to say they have been carrying for years and never had an accident. But I refuse to carry with one in the chamber and that’s just me.
I have a p365 with the manual safety. But I can’t get past those striker fired pistols relying on about .030” of a metal pin stopping it from firing. I know, I know, everyone is going to say they have been carrying for years and never had an accident. But I refuse to carry with one in the chamber and that’s just me.
jyoutz
Well-known member
Equipment
MX6000 HST open station, FEL, 6’ cutter, forks, 8’ rear blade, 7’ cultivator
I know a guy who found the perfect pistol (several times). One is this Springfield compact LW. He found it at the LGS and it followed him home. Before it had any miles on it, he spent a lot of time wearing the knife-sharp edges off of it. Then it made a trip to Robar (RIP) for their NP3 finish.
GibbyESS9
Active member
Equipment
2020 Bx23s,BX2672 plow, Titan Forks, Land Pride 48” BB, FEL, Bestco Flail mower
Springfield XDS compact .45 cal. Thin, doesn't print with nice IWB holster. 7+1 but I always carry a spare mag as well. Even have a nice green light/laser combo on it.
Attachments
dirtydeed
Well-known member
Lifetime Member
Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
Here's a shot of a "friend's" Sig P938 (top left) with extended mag. Supposedly this person has another extended mag (15 rounder) for this little pocket pistol. Looks funny as hell with it.
Ruger SR1911 Lightweight Commander in acp (bottom left). Aluminum main frame, titanium feed ramp so hollow points ain't an issue at all.
Ruger SR1911 Lightweight Commander in acp (bottom left). Aluminum main frame, titanium feed ramp so hollow points ain't an issue at all.
I've got several that I COULD carry all the time but it seems most of the time my go-to is my S&W Model 60 in .357 magnum, adjustable sights. It just works for me. And fired single action it is super accurate - no problem making the steel clang at 50 yards. The trigger is just so sweet compared to, say, my Sig P365 Macro. Sure...the Sig carries 18 rounds and the Model 60 only 5 - but my philosophy is that I should need only 1 round to take care of a problem. These days I stay out of crowded cities!
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
I've got a guy in Uzbekistan that's got a hacksaw and a hammer. he'll fix you right up.
Go down south to get the good tooling for the holster. Them northerners just wanna put a furry collar on it.
jyoutz
Well-known member
Equipment
MX6000 HST open station, FEL, 6’ cutter, forks, 8’ rear blade, 7’ cultivator
Sawdust&Shavings
Active member
Lifetime Member
Equipment
BX1870,LA203A,BX6315,BX2767,RCK48-18BX,GCK60-23BX
jyoutz
Well-known member
Equipment
MX6000 HST open station, FEL, 6’ cutter, forks, 8’ rear blade, 7’ cultivator
Oh my…Id have trouble concealing that in my French cycling outfit…no one would believe that.
Runs With Scissors
Well-known member
Equipment
L2501 TLB , Grappel, Brush Hog, Box Blade, Ballast box, Forks, Tiller, PH digger
Your "friend" has good taste in guns...I love my "friends" GSG....
It's cheap practice for using a 1911. (The suppressor is a nice "bonus" too!!!)
dirtydeed
Well-known member
Lifetime Member
Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
Love that thing too...well my "friend's" GSG. It runs like a sewing machine and easily connects at 50 yards. Yes, the fake can that came with it really completes the package. Funny thing is, it's actually louder with the "can" on it.
My friend has another very sweet shooter in 9mm as well. One of my favorites to shoot.