Crankshaft Sensor Plug
- Thread starter Thughett
- Start date
Pau7220
Well-known member
Equipment
L3650 GST, Landpride TL250 FEL w/ Piranha, 6' King Kutter, GM1084R Finish
Pictures are worth 1000 words.
There's a really good chance Kubota doesn't make the sensor... more likely Bosch, Denso, etc.. The Autozones, O'Reillys, and Advanced carry crank pigtails. Here's a start on a pic guide.
www.dstgateway.com
And another...
www.carid.com
There's a really good chance Kubota doesn't make the sensor... more likely Bosch, Denso, etc.. The Autozones, O'Reillys, and Advanced carry crank pigtails. Here's a start on a pic guide.
ACDelco Catalogs
www.dstgateway.com
Engine Crankshaft Position Sensor Connectors - CARiD.com
Full selection of Engine Crankshaft Position Sensor Connectors at CARiD.com. Lowest prices. In-House Experts. Easy Returns. Call 800-505-3274 or Shop Online.
Last edited:
RCW
Well-known member
Lifetime Member
Equipment
BX2360, FEL, MMM, BX2750D snowblower. 1953 Minneapolis Moline ZAU
For what machine?!?! Model number!?!
I see the L3301 in your data. Is it that one?!?!
Last edited:
Yes you can get it from Kubota. Kubota doesn't give out the information too much, but it is available. The problem is, most dealers don't know how to get them, or who to contact to get them. They issues a bulletin a while back, gosh I want to say 3 years ago? that had to do with harness connectors.
Another option is to find someone who has an old wire harness and ask them if you can buy the connector. I used to have a complete uncut harness listed on this site, for an L3301HST, had zero interest. So, what I started doing was looking for threads like this (need a connector) and I'd sell the connectors off of the harness. Sold all 3 injector connectors for $25/ea + shipping. Just an example. Dealers a lot of times will save harness parts just for this purpose so you might call dealers and ask them.
Another option is to find someone who has an old wire harness and ask them if you can buy the connector. I used to have a complete uncut harness listed on this site, for an L3301HST, had zero interest. So, what I started doing was looking for threads like this (need a connector) and I'd sell the connectors off of the harness. Sold all 3 injector connectors for $25/ea + shipping. Just an example. Dealers a lot of times will save harness parts just for this purpose so you might call dealers and ask them.