Caroni Finish Mower

scattergun

Member

Equipment
Kubota 2008 B2320, Kubota 2014 RTV 1140
Jul 25, 2017
37
0
6
Troy,MI
Anyone have any experience with this brand finish mower? Good~Bad or otherwise!!
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
29,159
5,456
113
Sandpoint, ID
They are some of the best made equipment out there.
 

scattergun

Member

Equipment
Kubota 2008 B2320, Kubota 2014 RTV 1140
Jul 25, 2017
37
0
6
Troy,MI
Thanks might have a opportunity to pick one up that is used but in good shape.
 

chim

Well-known member

Equipment
L4240HSTC with FEL, Ford 1210
Jan 19, 2013
1,839
925
113
Near Lancaster, PA, USA
I have one that I bought new around 1991. It is a 5 foot side discharge that has been abused badly, welded back together a time or two, sat outside for most of its life and should be dead. It lives and gets used on occasion behind the Ford 1210. I have a 6 foot LandPride rear discharge for the Kubota that works well but have been toying with the idea of getting a Caroni 93 inch rear discharge.
 

Utopia Texas

Member

Equipment
Kubota B2650/Kubota L6060
Jun 14, 2017
110
3
18
Brookshire & Cat Spring, Texas
I have the largest Caroni Estate Mower which has 5 blades and is 93" wide. Great mower but 2 minor problems.
(1) After two seasons and just 30 hours on the mower the wheels started to peel rubber and one wheel came completely apart. This is on smooth ground and I always grease the bearings before each use. The mower is always washed off and stored inside out of the sunlight. The rubber compound does not impress me.
(2) I wish the wheels could be adjusted higher. 4" may sound plenty high but on my 8 Acres of Burmuda during hot dry weather this is too short. 6" would be my preferred height most of the time