BX23 ujoint needed

[JPSR]

need front driveshaft u joints for bx23

 

[North Idaho Wolfman]

That part is available and easy enough from a dealer.

https://www.messicks.com/parts/kubota/k2561-16810?gad_source=1&gad_campaignid=22429320131&gbraid=0AAAAAD-1gA_OWmTEn5ASFKUN-1bu6QbKF&gclid=CjwKCAjwpqHTBhAcEiwAj2AfumO00X1l01U5pacPtwhrJ3RbrLXWAy5gkYO8YMSBtY_oQhXFF94oXRoCE6AQAvD_BwE

 

[PoTreeBoy]

Or, if you're like some of us with more time than $ and sense, you could disassemble it and replace the cross and bearings, assuming the hubs aren't damaged. Auto parts, industrial supply or on-line stores are possibilities.

 

[JPSR]

Or, if you're like some of us with more time than $ and sense, you could disassemble it and replace the cross and bearings, assuming the hubs aren't damaged. Auto parts, industrial supply or on-line stores are possibilities.

Do you know any part # for cross reference?

 

[North Idaho Wolfman]

They don't show the bearing cross as replaceable, so no part number.
Some of these crosses are made to not to be replaceable.
But if you can get it apart, take it to Napa auto parts and they can cross reference the joint.

 

[JPSR]

They don't show the bearing cross as replaceable, so no part number.
Some of these crosses are made to not to be replaceable.
But if you can get it apart, take it to Napa auto parts and they can cross reference the joint.

Thanks

 

[PoTreeBoy]

Do you know any part # for cross reference?

No, you won't be able to get it from Kubota. If you can disassemble it, you can measure it or take it to a parts store that can.

 

[JPSR]

No, you won't be able to get it from Kubota. If you can disassemble it, you can measure it or take it to a parts store that can.

Thanks