BX-25 and Zerks (Pictures)

[85Hokie]

How many times have we all "thought" we got em all, well I always thought there were 31 on the FEL, BH and Tractor....well I was wrong! There are 32!
and 7 more on the 60" MMM !

Here is a picture breakdown of all the zerks.....( someone tell me if I missed one)

 

[eserv]

you missed one on the
mmm There is a zerk for lubricating the lower bearing in the center spindle. I don't have a mower here to post a picture!

 

[85Hokie]

good call - greased the hell out of that one - never took the picture! #40 ! thank you

 

[RCW]

As Hokie says, there are a bunch of fittings!

If you don't have one, a lock and lube coupler is a great thing! Daren Todd talked me into one this year, and I love it! I think several of us bought them at the same time this spring.

They're expensive, but man, makes it go real quick, especially with a pneumatic grease gun.

http://locknlube.com/

 

[RCW]

Hokie - my 54" deck also has one about 6" aft of the tension pulley - your #36 fitting. Just inboard of the left side mount.

Not sure yours has the same.

 

[ThisIsNotaStep]

Ya missed another one, or 4, the outboard wheels on my mmm have zerks too!

 

[olthumpa]

Sure are allot of Zerks on this thread.

I have one on the back side of the front axle pivot that is a real pain to get to and easily over looked.

 

[William1]

The only fitting I cannot get the lock N load zerk tool on is the pedal.

So... I bought a 2-1/2" long zerk and screwed it in to my my grease guns original press N hold fitting. When I do the pedal, I attach that to the lock N load and hit the pedal zerk. All of the rest, the lock N load works great.

36 hours on my BX25D since August, 1, 2015.
So glad I got a pneumatic grease gun.........

 

[85Hokie]

The only fitting I cannot get the lock N load zerk tool on is the pedal.

So... I bought a 2-1/2" long zerk and screwed it in to my my grease guns original press N hold fitting. When I do the pedal, I attach that to the lock N load and hit the pedal zerk. All of the rest, the lock N load works great.

36 hours on my BX25D since August, 1, 2015.
So glad I got a pneumatic grease gun.........

I too have to admit - cutting on the air compressor is the worst part of greasin the ol girl!!!!

I think I can get my Lock-n-lube on the HST pedal, I will have to double check that one......

that lock-n-lube is some of the best money spent!

 

[85Hokie]

Ya missed another one, or 4, the outboard wheels on my mmm have zerks too!

Yes - you are correct .....son of a gun, what are we up to 44???? damn that is a grease fittin's!